Hot shower

Portable hot water unit for shower

1. Follow the hose to the house and turn ON the water spigot. (there’s also a little valve where the hose connects that may or may not be closed — it should be aligned with hose if open, across hose if closed. Open it if closed.)

2. Turn ON the valve for the propane.

3. Use the white button on the shower head to get the water going. If you’ve done all of the above correctly, you now have warm water. 

Use the left valve (marked Shower Temp) to desired water temp. If there’s air in the water hose from the house, the temp might temporarily drop but just let the water run a few more seconds and it should get back to the desired temp.

The white button on the shower head’s handle turns on/off water.

Hot water will start flowing when you turn on the shower.

The bottom left dial on the unit — “Gas” — is to set the water temperature you want. (Hint: Half-way between Min and Max seems to be nice temp for a shower). The digital display will show the temperature.

Don’t change any of the other settings please.